The various range of industrial powder booths is based on modular concept,which enables each both to be customized to suit ny specific requirement.The size of the manual & automatic booth is determined by the size,the speed and the shape of the objects to be coated.The high efficiency cyclone collector recovers as much as 98% plus of the powder exhausted from the booth.It has 2880rpm motor with highly efficient impeller given a rotary motion which creates a centrifugal force on paticles.After filter system for non-pollution area.

The powder booths are designed for a single operator to manually apply powder to stationery product other booths are designed so that parts can be conveyed through the enclosure.Conveyorised system may be designed for manual application from two sides,automatic appliction or a combination of both,depending on the system requirement.

 

100 kv electrostatic powder coating machine combine product proven powder sprey,gun and control technology and performance suitable for all type of jobs with low and mass volume in any batch & conveyorised system.

 

Technical Specification:

Output voltage: 100 kV DC

Powder required: 200 V (AC) 10% 50 Hz

Max air Consumption: 13.2 m3/hr.

Optimum inlet pressure: 6 bar

 

The light weight gun enables better maneuverability and with integral cascade ensures high transfer efficiency by minimizing HV losses.

 

Technical Specification:

Output voltage: 100 KV-ve (Max.)

Powder flow rate: Upto 500 gm/min controllable

Gun Weight: 650 gm

 

A user friendly control panel is modunted on the trolley top for ease of opertions.It houses the power and air control regulators and other Electro-pneumatic controls including high voltge adjustment.

 

Technical Specification:

Mode of HV Generation: High Frequency

Input voltage: 230V AC,50 Hz (Single Phase)

Output voltage: 20 to 100 KV(-ve) variable

Powder Consumption: 30 VA approx

Output Current: 70 ua max

 

Made up Stainless Steel,It is corrosion resistant and facilities,easy change of colour. The feed pump mounted thereon can pump 30 Kg/hr Max.) of powder,which can be controlled as per the requirement.

 

Technical Specification:

Hopper Capacity: 10 Kg of Powder

Fluidisation Control: Pneumatic

Air Requirement: 300 It/Min. At 5 Kg/cm

 

We offers the full range of powder or liquid curing oven whether electrical,gas or diesel fired.Whether batch type or conveyorised tunnel type.Designed and built specially for powder & liquid curing purposes assuring you of low powder consumption with the temperature throughout the working space in the oven.

 

Available in a range of sizes,we offers robust construction together with ease of adjustment of the up-down stroke through its high speed variable controller.Manual override is fitted ,where beneficial can be offered with PLC control.

 

The light weight gun enables better maneuverability and with integral cascade ensures high transfer efficiency by minimizing HV losses.

 

Technical Specification:

Output voltage: 100 KV-ve (Max.)

Powder flow rate: Upto 500 gm/min controllable

Gun Weight: 650 gm

 

Liquid spray printing booth has been advocated through out industry as the most efficient method of filtering print over spray.

Automatic sprey pre-treatment is the most common system for pre-treatment and therefore recommended where the needed space is available. In large scale productions the passage system would be the best and most effective choice with up to maximum 6 meter long work pieces.The control system can be manual or automatic.